Print this page An Introduction to Hydraulic Design of Culverts
J. Paul Guyer, P.E., R.A., Fellow ASCE, Fellow AEI
Course Outline
1. GENERAL
2. INLET CONTROL
3. OUTLET CONTROL
4. PROCEDURES FOR SELECTION OF CULVERT SIZE
5. INSTRUCTIONS FOR USE OF INLET-CONTROL NOMOGRAPHS
6. INSTRUCTION FOR USE OF OUTLET-CONTROL NOMOGRAPHY
7. CULVERT CAPACITY CHARTS
This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of the course materials.
Learning Objective
Upon completion of this course you will:
- Learn about inlet and outlet hydraulic control of culverts;
- Learn how to employ nomographic solutions to determine headwater depth for concrete pipe culverts with inlet control;
- Learn about headwater depth parameters for oval concrete pipe culverts, long axis vertical, with inlet control;
- Learn how to determine headwater depth for circular pipe culverts with beveled ring inlet control;
- Learn the procedures for culvert size selection;
- Learn how to use culvert capacity charts; and
- Learn how to employ outlet control nomography.
Intended Audience
This course is intended for civil engineers and other design and construction professionals wanting an introduction to culvert design and hydraulics.
Benefit for Attendee
This course will give civil engineers and other design and construction professionals an introduction to design of culverts for storm water drainage and control.
Course Introduction
This is an introduction to a nomographic approach to culvert hydraulics.
About Course Author
Paul Guyer is a registered mechanical engineer, civil engineer, fire protection engineer and architect with over 35 years experience in the design of buildings and related infrastructure. For an additional 9 years he was a senior-level advisor to the California Legislature on infrastructure and capital outlay issues. He has designed and supervised the design of hundreds of construction projects requiring the preparation of detailed working drawings and specifications for federal, state and local public agencies and private companies. He is a graduate of Stanford University and has held numerous national, state and local positions with the American Society of Civil Engineers and National Society of Professional Engineers.
Course Content
The course content is contained in the following PDF file:
An Introduction to Hydraulic Design of Culverts
Please click on the above underlined hypertext to view, download or print the document for your study. Because of the large file size, we recommend that you first save the file to your computer by right clicking the mouse and choosing "Save Target As ...", and then open the file in Adobe Acrobat Reader. If you still experience any difficulty in downloading or opening this file, you may need to close some applications or reboot your computer to free up some memory.
Course Summary
This course will give you design guidance you can apply to the design of culverts to control stormwater drainage at streets, highways, buildings and other structures.
Quiz
Once you finish studying the above course content, you need to take a quiz to obtain the PDH credits.
DISCLAIMER: The materials contained in the online course are not intended as a representation or warranty on the part of PDH Center or any other person/organization named herein. The materials are for general information only. They are not a substitute for competent professional advice. Application of this information to a specific project should be reviewed by a registered architect and/or professional engineer/surveyor. Anyone making use of the information set forth herein does so at their own risk and assumes any and all resulting liability arising therefrom.
