Print this page Specifying and the Technical Evaluation of Cryogenic Valves Used in the Oil & Gas Industry for very low temperature
Peter Smith, HNC (Mech)
Course Outline
This is a 1 hour course utilizing the current product catalogue of Velan Valves that covers "Cryogenic Valves - Gate, Globe, Check, Ball and Butterfly Valves". For use in very low temperature services.
I have also included Appendix C, "Standards pertaining to Valves", from "The Valve Selection Handbook". This references the relevant standards. This is also available as a separate course.
The valves presented in this catalogue are designed to internationally recognised standards and the questions in the quiz are based on the technical data contained within this catalogue. There may be slight variations with other manufacturer's.
The Piping Engineer
who is responsible for specifying, procuring, inspection and the installation
of valves must be familiar with a manufacturer's catalogues and the way that
the information is presented to potential customers. The Specifying Piping Engineer
will have to review a Manufacturer's technical data when the technical evaluation
is made on the valves, prior to the placement of the order.
This course includes
a multiple-choice quiz at the end, which is designed to enhance the understanding
of the course materials.
Learning Objective
The objective is to learn how valves are technically presented in manufacturer's catalogues and how the various options available to the Engineer are formatted.
The Course will cover:
- Catalogue presentation
- Function
- Design
- Materials
- Construction
- Valve weights
- Valve dimensions
- Inspection & Testing
Intended
Audience
Piping Engineers, Mechanical Engineers, Project Engineers, Procurement Managers and Project Buyers, QA/QC Personnel, and Inspectors.
Benefit
to Attendees
It is essential
that a Student is familiar with the way that valves are presented by a manufacturer
in a catalogue format.
Course
Introduction
There are numerous
types of valves and it is essential that a Student is familiar with the various
words, terms and abbreviations used in relation to valves. It is a complex sector
and it is essential that the student has a clear understanding of the subject.
Course
Content
In this course you are required to study Velan Valves -"Cryogenic Valves - Gate, Globe, Check, Ball and Butterfly Valves". and Appendix C, "Standards pertaining to Valves".
You need to open or download these documents to study this course.
Course Summary
It
is essential that the Specifying Piping Engineer fully comprehends a manufacturer's
technical data, to assist him when selecting the correct valve for the job.
Quiz
Once you finish studying the above course content, you need to take a quiz to obtain the PDH credits.
DISCLAIMER: The materials contained in the online course are not intended as a representation or warranty on the part of PDH Center or any other person/organization named herein. The materials are for general information only. They are not a substitute for competent professional advice. Application of this information to a specific project should be reviewed by a registered architect and/or professional engineer/surveyor. Anyone making use of the information set forth herein does so at their own risk and assumes any and all resulting liability arising therefrom.
