Print this page Selected Topics in Mechanics of Materials
Course Outline
Whether you are an engineer or an architect, it is essential to have a basic understanding about the mechanics of materials. This course introduces engineers and architects to the fundamental principles involved in designing typical components such as drive shafts, floor beams, pressure tanks, and bolted connections found in machines or structures. The selected topics include the mechanical properties of materials, torsion, bending, stress and strain transformation, beam deflection, and column stability, with the emphasis towards real-world applications.
This course includes a multiple-choice quiz at the end, which is designed to
enhance the understanding of course materials.
Learning
Objectives
At
the conclusion of this course, the student will:
-
Be familiar with the vocabulary related to engineering analysis and design;
-
Know the basic assumptions used in mechanics of materials;
-
Have a better understanding of material properties;
- Understand material behavior under different loadings;
- Know how to draw free-body diagrams;
- Understand engineering design approaches;
- Be familiar with stress analysis methods;
- Know how to construct Mohr's circles;
- Be able to transform stresses and strains;
- Know how to calculate internal forces in components;
-
Be able to calculate various deformations;
- Know the effects of combined loads;
- Understand the deformation compatibility requirements;
- Be aware of two types of buckling;
- Be able to analyze column stability;
- Understand the factor of safety required;
-
Be able to design simple structures;
-
Improve engineering design skills.
Course Content
The purpose of
this course is to review basic concepts of material analysis and design using the strength of materials approach. It is highly recommended for you to have a copy of Mechanics of Materials by Beer, Johnson, Dewolf and Mazurek or an equivalent textbook. If you do not have a hard copy of the textbook, you may review
Chapters 1 through 6 of the following online book by Prof. Madhukar Vable (a hardcopy is also available for purchase through Amazon.com):
Introduction to Mechanics of Materials, 2nd Edition (PDF, 597 pages) Related
Links
Please click the above link to download the entire book for your study. Here is the Table of Content of the book:
Chapter 1 Stress
Chapter 2 Strain
Chapter 3 Mechanical Properties of Materials
Chapter 4 Axial Members
Chapter 5 Torsion of Shafts
Chapter 6 Symmetric Bending of Beams
Chapter 7 Deflection of Symmetric Beams
Chapter 8 Stress Transformation
Chapter 9 Strain Transformation
Chapter 10 Design and Failure
Chapter 11 Stability of Columns
Appendices
For
additional technical information related to this subject, please visit the following
websites or web pages:
Mechanics of Material Basics: General Equation and Definitions
Mechanics of Materials by Mansfield Merriman
Strength of Materials Wikipedia
Stress & Strain Calculator
Quiz
Once you finish studying the above course content you need to take a quiz to obtain the PDH credits.
DISCLAIMER: The materials contained in the online course are not intended as a representation or warranty on the part of PDHonline.org or any other person/organization named herein. The materials are for general information only. They are not a substitute for competent professional advice. Application of this information to a specific project should be reviewed by a registered professional engineer. Anyone making use of the information set forth herein does so at their own risk and assumes any and all resulting liability arising therefrom.
