Print this page HVAC & Cooling Towers– Practical Calculations
Jurandir Primo, PE
Course Outline
This five-hour online course is only an introduction to one of the most important aspects of the HVAC & Cooling Towers - Practical Calculations tailored for engineers, technicians, students, beginners, contractors and professionals interested in sizing HVAC equipment.
This course includes
a multiple choice quiz at the end,
Learning Objective
At the conclusion of this course, the student will:
- Understand the formulae and parameters used in the ASHRAE Standards;
- Understand the formulae and parameters used for HVAC and Cooling Towers;
- Determine the minimum required conditions for HVAC flow process;
- Understand the common terms used for dimensioning Air Handling Units;
- Be able to learn and recognize heat, work, force, energy, power and technical terms;
- Know how to design Centrifugal Pumps, Fans and Ducts used in HVAC systems;
- Know the basic dimensioning of Compressors and Chillers used in HVAC systems;
- Know the formulae to determine the minimum required area for Cooling Towers;
- Understand the meaning of dry-bulb, dew point and wet bulb temperature;
- Learn the terms and concepts used for Cooling Towers mechanical design;
- Know the basic comprehension of the terms used in industrial ventilation;
- Remember concepts and parameters used in thermodynamics;
- Be able to design HVAC and Cooling Towers and technical concepts; and
- Be able of converting metric and imperial units used in HVAC calculations.
Intended Audience
This course is intended for students, designers, mechanical engineers and professionals interested or working with HVAC, Cooling Towers, Chillers and Compressors.
Benefit to Attendees
Attendee of this course will be able to understand, calculate, specify and plan HVAC and Cooling Towers assemblies.
Course Introduction
The student will understand the terms, concepts and the basic principles used in ASHRAE and HVAC Standards specification and codes.
Course Content
In this lesson, you are required to download and study the following course content in PDF format:
HVAC & Cooling Towers– Practical Calculations
Please click on
the above underlined hypertext to view, download or print the document for your
study. Because of the large file size, we recommend that you first save the
file to your computer by right clicking the mouse and choosing "Save Target
As ...", and then open the file in Adobe Acrobat Reader. If you still experience
any difficulty in downloading or opening this file, you may need to close some
applications or reboot your computer to free up some memory.
Course Summary
This short course can be used to give the main guidelines to choose the correct Cooling Towers types under the ASHRAE codes, mandatory requirements, specific prohibitions, non-mandatory guidance, construction activities, calculations and technical formulae.
Related Links
For additional technical information related to this subject, please visit the following websites:
http://www.engineeringtoolbox.com/sizing-ducts-d_207.html
www.engineeringtoolbox.com/air-psychrometrics-properties-t_8.html
Quiz
Once you finish studying the above course content, you need to take a quiz to obtain the PDH credits.
DISCLAIMER: The materials contained in the online course are not intended as a representation or warranty on the part of PDH Center or any other person/organization named herein. The materials are for general information only. They are not a substitute for competent professional advice. Application of this information to a specific project should be reviewed by a registered architect and/or professional engineer/surveyor. Anyone making use of the information set forth herein does so at their own risk and assumes any and all resulting liability arising therefrom.
