Print this page An Introduction to Inspection of Boilers and Unfired Pressure Vessels
J. Paul Guyer, P.E., R.A., Fellow ASCE, Fellow AEI
Course Outline
1. INSPECTION AND TEST FREQUENCIES
2. UNFIRED PRESSURE VESSELS
3. BOILER INSPECTIONS
4. UNFIRED PRESSURE VESSEL INSPECTIONS
5. PRESSURE TESTS
6. OPERATIONAL TESTS
7. REPAIRS AND ALTERATIONS
8. INSPECTION CERTIFICATES AND REPORTS
9. MAXIMUM ALLOWABLE WORKING PRESSURE
This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of the course materials.
Learning Objective
Upon completion of this course you will:
- Learn the required frequency of inspection and testing of heat exchangers operating over and under 250 psig;
- Learn the fundamentals of pressure test;
- Learn when hydrostatic testing is required;
- Learn about special inspections required for steam boilers;
- Learn the special considerations when repairs are made to steam boilers as a result of inspection and testing;
- Learn the requirements for boilers testing and inspection in dry layup; and
- Learn about the appropriate codes that apply to testing and inspection.
Intended Audience
This course is intended for mechanical engineers looking for an introduction to inspecting and testing boilers, unfired pressure vessels, and associated equipment to assure safe operation.
Benefit for Attendee
This course will give mechanical engineers an introduction to the fundamentals of inspecting and testing operational unfired pressure vessels and boilers.
Course Introduction
This is an introduction to testing and inspection of steam and hot water boilers, unfired pressure vessels and associated equipment.
About Course Author
Paul Guyer is a registered mechanical engineer, civil engineer, fire protection engineer and architect with over 35 years experience in the design of buildings and related infrastructure. For an additional 9 years he was a senior-level advisor to the California Legislature on infrastructure and capital outlay issues. He has designed and supervised the design of hundreds of construction projects requiring the preparation of detailed working drawings and specifications for federal, state and local public agencies and private companies. He is a graduate of Stanford University and has held numerous national, state and local positions with the American Society of Civil Engineers and National Society of Professional Engineers.
Course Content
The course content is contained in the following PDF file:
An Introduction to Inspection of Boilers and Unfired Pressure Vessels
Please click on the above underlined hypertext to view, download or print the document for your study. Because of the large file size, we recommend that you first save the file to your computer by right clicking the mouse and choosing "Save Target As ...", and then open the file in Adobe Acrobat Reader. If you still experience any difficulty in downloading or opening this file, you may need to close some applications or reboot your computer to free up some memory.
Course Summary
This course will give you guidance you can apply in operating and maintaining boilers and pressure vessels safely and efficiently.
Quiz
Once you finish studying the above course content, you need to take a quiz to obtain the PDH credits.
DISCLAIMER: The materials contained in the online course are not intended as a representation or warranty on the part of PDH Center or any other person/organization named herein. The materials are for general information only. They are not a substitute for competent professional advice. Application of this information to a specific project should be reviewed by a registered architect and/or professional engineer/surveyor. Anyone making use of the information set forth herein does so at their own risk and assumes any and all resulting liability arising therefrom.
